Hi Guys,
I have been advised by my mechanic that due to oil starting to seep into turbo that i should get a egr blockoff, inlet manifold clean and a catch can on the oil mist. He reckons all this for under $1000.
Any thoughts, advise recomendations would be appreciated before i do this.
Thanks
MarkB )
RE: 3.0td engine mods - -
Posted on 06-03-2013 21:01
All good mods Mark. Add a Dawes valve to your truck and a pyrometer and she'll be sweet for many hundreds of thousands of kilometres. The dawes is to limit boost to 15 pounds and the pyro is so you cam monitor engine exhaust temps. If the pyro is pre turbo then don't exceed 550C towing up hills or any time, and allow the motor to cool down below 200 before switching it off so you don't fry your turbo bearings.