Gonna be taken the old girl apart this weekend, got grease coming out of the CV joints so me thinks the seals have gone in the axle shaft. Just wondering if anyone has done this before, and if so, whether they had any problems that i should know about.
thanks
Steph
RE: Leaking CV Joints -
Posted on 14-09-2008 15:02
Easy job, you just need something to knock the seal in straight and square. I use a socket just slightly smaller than the outside diameter of the seal with an extension bar, then tap it in with a hammer. Doesn't hurt to pack a bit more grease into the CV joint while it's out. When you go to put the axle back in, try not to let it rub too heavily on the new seal.
Tony
RE: Leaking CV Joints -
Posted on 14-09-2008 20:10